SIZES & AVAILABILITY

Minerelle is a unique UK produced solid composite worksurface which can be fitted and installed in the same format as a standard laminate worktop. However, we recommend that you attend one of our Free of Charge training events, see Training section for further details.

Kitchen Worktops - 41mm nominal thickness
4100 x 650mm - Edged 1 long, 2 short sides
2050 x 650mm - Edged 1 long, 2 short sides
2050 x 1200mm - Edged 4 sides
2050 x 900mm - Edged 2 long, 1 short sides
3000 x 900mm - Edged 4 sides with ‘D’ end
4100 x 900mm - Edged 4 sides

Kitchen Worktops - 60mm nominal thickness
3000 x 650mm - Edged 1 long, 2 short sides
2050 x 650mm - Edged 1 long, 2 short sides
2050 x 900mm - Edged 2 long, 1 short sides (can also be ordered as 3000mm)

Inline Workstation - 41mm nominal thickness (selected colours)
41mm nominal thickness
1500 x 650mm - Edged 1 long side
Available with pre-machined cut-outs for selected sinks.

Edging (strip lenghths for worktops)
4100 x 45 x 6mm
4100 x 62 x 6mm
1350 x 45 x 6mm 
3010 x 34 x 6mm

Splashbacks/Hob Panels
600 x 600 x 12mm
900 x 750 x 12mm
1800 x 750 x 12mm
1260 x 1220 x 12mm
1500 x 1220 x 12mm
4100 x 600 x 6mm (not suitable for behind cooker hobs)

Upstands
12mm nominal thickness
4100mm length x 50/100mm widths
All with 3mm profile on front, top edge

Bathroom Worktops - 30mm nominal thickness
3000 x 740mm - Edged 4 sides
3000 x 365mm - Edged 1 long, 2 short

Bathroom Panelling
6mm nominal thickness, cast, solid surface
2440 x 1220mm
2440 x 900mm

Jointing Beads (for use with panelling)
2440 x 12 x 12mm (internal corner)
2440 x 18 x 6mm ('T' section)
2440 x 12 x 12mm (external corner)

Skirting (for use with panelling)
12mm nominal thickness
4100mm length x 50/100mm widths
All with 3mm profile top edge

Ancillary items and Accessories

Worktop savers
400 x 300 x 12mm Minerelle cast sheet, to match worktop design

Seaming Adhesive & Applicators
50ml cartridge (colour matched to each design). Please refer to the colour range page for further details.
Applicator gun (required for cartridges)

Consumer Care Kit
Including...
Minerelle Finishing Spray
Microfibre cloths
Scotchbrite sponge
Care & Maintenance instructions

Installation Starter Kit (for fitters use)
Including...
Sanding discs - grades 180, 240 & 320 grit
Scotchbrite pads
Imanol (isopropanol)
Minerelle Finishing Spray
Aluminium Heat Resistant tape
Fabricator cloth
Fabrication & Installation manual

Repair Kit (N.B.Made to order)
Including...
150ml Repair compound
Catalyst
imanol (denatured alcohol)
Mixing cups, spatulas, gloves and instructions

Note. Individual replacement items e.g. Minerelle Finishing Spray, can be purchased from your local Minerelle retailer or by request via the "Contact us" page.